澳门太阳集团8722-www.8722.com-太阳集团8722c

News Categories

Hot key words

Contact Us

Shandong Rope Net Machinery Co., Ltd.


Add: Dongbu High & New Development Zone,Tai’an,Shandong, China

Tell: +86-538-8514322 +86-538-6262977

Fax: +86-538-8669066

E-mail: amy@ropenet.com

Requirements for ropes when making ropes

Your current location: Home >> News >> Product Encyclopedia

Requirements for ropes when making ropes

Date:2016-08-29 00:00 Source: Click:

The rope making machine comprises a base and a feeding mechanism mounted on the base. The twisting rope mechanism, the power mechanism and the feeding mechanism are composed of a central shaft, a synchronous transmission wheel train, a left and right square frame plate and a left- The second traction shaft, the cross bevel gear, the vertical bevel gear, the left bearing bracket, the second bearing shaft, the second bevel gear, the second bevel gear, Right bearing block and the second synchronous transmission wheel. The power mechanism is composed of motor and pulley transmission. The electric motor is connected with the synchronous transmission wheel of No.1 and No.2 through the pulley transmission. The synchronous transmission wheel of No.1 is driven by the feed mechanism. Line, two synchronous transmission wheel drive twine rope mechanism to complete the rope and rope, the automatic rope machine, can automatically rope, can produce two shares rope, three or four rope, high production efficiency, product quality, province Time, the provincial labor, effort. We use the time or pay attention to some of the conditions of the rope machinery:

1, the first system of rope machine type, type classification principles. If there is duplication, it can be represented by two representative Chinese phonetic prefixes, and the structural parameters of the rope making machine are expressed by the main parameters. These products are in the main parameters followed by filling serial number, in the main parameter and serial number between the use of short dash line link.

2, the rope system design should be consistent with the technical requirements of the rope craft, reasonable layout, handsome in appearance, reliable performance, simple operation, so when the design is easy to repair when the failure, you can improve the high series, universal and standardized , The rope machine shall be manufactured in accordance with the drawings and technical documents approved by the prescribed procedures.

3, the rope machine power and control devices and to ensure that the basic properties of the rope accessories and installation and adjustment of the special tools used by the manufacturer matching, and then supply.

4, the final appearance of the surface of the rope machine should not have a pattern is not specified obvious bumps, depression, rough and other defects such as damage, rope paint layer should be uniform color, as long as the above basic conditions, the rope Machine will be better to use.

Proper operation of the rope machine working conditions, can better make us use it, bring us high efficiency.

Related Tags:Other

Recently viewed:

  • Service
QR code

Scan QR code

Share
Welcome to our message
Please enter the message, we will contact you soon.
Name
Contact
Phone
Phone / mobile number
XML 地图 | Sitemap 地图